Magnetic Products

Button Magnets

Product Details:
  • Condition: New

“CRYSTAL” Button Magnets which are made in four sizes specially designed in “Alnico” to give a highly efficient magnet suitable for magnetic indicators and drives.
Designed for applications where height is too restricted for conventional deep Pot magnets.
Ideal for magnetic fasteners in machine tools, workshops & in office displays.
They can be fixed by non-magnetic screw to any non-ferrous materials. Supplied complete with plated keeper.
Special sizes can also be manufactured.
Square and rectangular shape also available.

Specifications:


Sr. No.Cat. No.Diameter
(OD)
Height
(H)
ThreadingDepth of Threading
(D)
Magnetic Pull
kg
1.AA-192512 mm10 mmM 53-4mm0.6
2.AA-192620 mm12 mmNILNIL1.6
3.AA-192725 mm15 mmM 65-6mm4.0

Electroperm Magnetic Chucks

Product Details:
  • Condition : New

For Heavy Duty Milling Machine
"Crystal" brand Electroperm Magnetic Chucks ensure higher magnetic and mechanical performances, as well as absolute reliability, when compared with conventional chucks. Electriperm Magnetic Chuck is "COLD" device, not subject to internal wear or deformation resulting from moving internal parts.

Our Electroperm Magnetic Chucks do not consume electrical power except for the very short period of activation or deactivation of the working surface. Once fixed to the machine table Electroperm Magnetic Chucks will be geomertrically stable as the table itself.

Electroperm Magntic Chucks are economical for operation and maintanace. Electroperm Magnetic Chucks Produce magnetic clamping system for the Most Powerfull Machine tools available. Systems are switched ON or OFF with simple electrical pulse. Electroperm Magnetic Chucks are entirely independent of external power supply when holding work pieces. There is no risk,when power fails.

The de-magnetization cycle of Electoperm Magnetic chuck eliminates possible residual magnetism in the workpiece,therefore easy release for high alloy steel parats.

They are designed for heavy operation such as milling cut of 3 to 6 mm depth at recommended speed & feed.

Hardened & Ground Precision Grinding Vice

Product Details:
  • Condition: New

For high accuracy Light Machining, Grinding, Inspection or marking out of precision components. Vice can be used, standing on its base, sides, end or top. Guaranteed 0.005/100 mm for Parallelism, Flatness & Squareness with the vice in any position. Manufactured from high grade oil hardening steel, hardened & tempered to ensure stability & accuracy throughout the unit's working life.

Hardened 'V' Block

The 'V’ Block have two 'V’ angles of different sizes to take jobs of various dimention. By means of clamp the work can be held rigidly to the 'V’ Block. The top 'V’ and bottom 'V’ are parallel within ± 3 micron and it's squareness to the end faces and height variation to the 'V Block in a pair is within ± 3 micron

In Built Features :
1 ' V’ Block are hardened and ground to 55 to 58 HRC.
2 Precision ' V’ Block for Toll Room, Inspection, Work, Assembly Shop.
3 All sides precision ground, Parallel and square.
4 ' V’ groove ground central and parallel two sides & base, Perfect aligned and matched
with ± 5 microns.
5 Supplied with clamp for holding job.
6 Hold square and round work.
7 Permits grinding ends of work square with sides.

Magnetic Adaptor Plate

Features
  • Top and bottom surfaces are magnetic.
  • The magnetic section on one side is separated so as to adopt itself to the surface of the
  • instrument tool or part to be held.
  • The opposite sides attract to any metal surface on any machine.
  • Converts your surface gauge into a magnetic unit and can be used as a grinding chuck for small
  • grinding operation.
  • Top and Bottom parallel within 0.005 mm.
Specifications
  • Cat No.AA-1581 90L X 65W X 20T mm
  • Cat No.AA-1582 150L X 90W X 25T mm

Additional Information:
  • Item Code: AA-158

Magnetic Adjustable Link

"CRYSTAL" Magnetic Adjustable Link is a twin unit possessing a multi angle capability.
It can be quick located at any angle by the turn of a wing nut thus providing the simplest and
most rapid means of clamping together, two light weight ferrous parts.
A powerful grip is exerted by two permanent magnets housed in each of two rectangular blocks
which are connected laterally by a pair of side pieces.
By using the link in multiples, the most complex arrangement of sheets and strips can be firmly
and easily secured for welding and assembly.

Specifications:
  • Specifications: cat. No. AA-1928
  • Overall length: 125mm.
  • Overall width: 25mm.
  • Size of each block: 50 X 25 X 25.
  • Magnetic Pull on Each Block: 15Kg.
  • We also manufacture the magnetic Floaters/ Separators as per customer's specifications.

Magnetic Angle Setter

In this product two magnets are combined with round angle indicating dial.
One can adjust any angle freely.
These holders have "ON/OFF" facility, to remove the work piece easily.
All magnetic holders have one 'V' and can attract curved faces as well as plane faces.

Specifications

SR.NOCat. No.Holder Dimensions
1.AA-460150 WX55 HX 190 L
2.AA-460250 W X 55 H X 275 L
3.AA-460350 WX55 HX 166 L

Additional Information:
  • Item Code: AA-460

Magnetic Base

Product Details:
  • Condition: New

A power permanent Magnetic Base hold firmly to any steel or iron surface-horizontally, vertically or up- side down, thus, eliminating time spent on clamping indicator to machine The dial gauge can be locked in any desired position with single lock (Centralised clamping) The clamping hole intended for dia 8 mm stem and dovetail clamp for dial test indicator. Fine Adjustment is provided. The clamping is very easy and smooth as same is achieved by operating the centralized Knob.

Magnetic Hold Fast

Magnetic Hold Fast

  • Basically work holding and work handling tools these pot magnets are appropriate when bestpossible grip is required but not attraction from a distance.
  • Because of their exceptionally great grips each has a jack-off screw, which also serves as a
  • handle.
  • Magnetic effects are confined to the pole face, there is no stray flux. Can be used single or in multiple to make welding and other assembly jigs, and lifting magnets.

Specifications

Sr. No.Cat. No.Diameter
Mm
Body height
mm
Fixing hole
center mm
Magnetic pull
kg.
1.AA-190145453220
2.AA-190255503830
3.AA-190370655040
4.AA-1904100756950

Additional Information:
  • Item Code: AA-190

Magnetic Holder

Product Details:
  • Condition: New

Magnetic Holder:
  • CRYSTAL’ Magnetic Holder has instant grip at the turn of a handle.
  • Incorporating plain and vee faces, it is equally effective in securing iron, steel sheets, bars or tubes, on machine bed or any other flat ferrous base.
  • This can be used in Tool Room, Shop Floor, inspection Department, Assembly Shop, and has unlimited application in Welding shop.
  • The magnetic holder is a compact unit housing powerful permanent magnet and cannot be demagnetized unless it is dismantled [which should not be attempted in any case].
  • Maintenance requirement is limited to occasional oiling and regrinding of the magnetic contacting faces, which should be flat and smooth to ensure maximum holding power.
  • Any welding splash can be removed with a smooth file.
  • Hardened AA-1511 H: Same as Cat. No. AA-1511 S but with hardened holding surface and ‘V’ angle. With this type, all ‘V’ angles are equipped with Hardened Steel Plates, which ensure extra resistance

Specifications:

Sr. No.Cat. No. Dimensions L x W x HMagnetic Pull



On PlainOn ‘V’ Surface
1AA-1511 S-Standard110x110x140125kg (1225N)100kg (980N)
2AA-1511 H-Hardened110x110x140100kg (980N)75kg (735N)

 


Additional Information:
  • Item Code: AA-151

Magnetic Holder

Product Details:
  • Condition: New

Magnetic Holder:
  • CRYSTAL’ Magnetic Holder has instant grip at the turn of a handle.
  • Incorporating plain and vee faces, it is equally effective in securing iron, steel sheets, bars or tubes, on machine bed or any other flat ferrous base.
  • This can be used in Tool Room, Shop Floor, inspection Department, Assembly Shop, and has unlimited application in Welding shop.
  • The magnetic holder is a compact unit housing powerful permanent magnet and cannot be demagnetized unless it is dismantled [which should not be attempted in any case].
  • Maintenance requirement is limited to occasional oiling and regrinding of the magnetic contacting faces, which should be flat and smooth to ensure maximum holding power.
  • Any welding splash can be removed with a smooth file.
  • Hardened AA-1511 H: Same as Cat. No. AA-1511 S but with hardened holding surface and ‘V’ angle. With this type, all ‘V’ angles are equipped with Hardened Steel Plates, which ensure extra resistance

Specifications:

Sr. No.Cat. No. Dimensions L x W x HMagnetic Pull



On PlainOn ‘V’ Surface
1AA-1511 S-Standard110x110x140125kg (1225N)100kg (980N)
2AA-1511 H-Hardened110x110x140100kg (980N)75kg (735N)

 

Magnetic Holder

Product Details:
  • Condition : New

Magnetic Holder:
  • CRYSTAL’ Magnetic Holder has instant grip at the turn of a handle.
  • Incorporating plain and vee faces, it is equally effective in securing iron, steel sheets, bars or tubes, on machine bed or any other flat ferrous base.
  • This can be used in Tool Room, Shop Floor, inspection Department, Assembly Shop, and has unlimited application in Welding shop.
  • The magnetic holder is a compact unit housing powerful permanent magnet and cannot be demagnetized unless it is dismantled [which should not be attempted in any case].
  • Maintenance requirement is limited to occasional oiling and regrinding of the magnetic contacting faces, which should be flat and smooth to ensure maximum holding power.
  • Any welding splash can be removed with a smooth file.
  • Hardened AA-1511 H: Same as Cat. No. AA-1511 S but with hardened holding surface and ‘V’ angle. With this type, all ‘V’ angles are equipped with Hardened Steel Plates, which ensure extra resistance

Specifications:

Sr. No.Cat. No. Dimensions L x W x HMagnetic Pull



On PlainOn ‘V’ Surface
1AA-1511 S-Standard110x110x140125kg (1225N)100kg (980N)
2AA-1511 H-Hardened110x110x140100kg (980N)75kg (735N)

 

Magnetic Positioner

A Combination of all the facilities of the magnetic Holder and Adjustable Links.
The "CRYSTAL" Magnetic Positioner will hold round or flat parts at any required angle.
Each of the magnetic blocks has two magnetic faces.
The positioner is locked by tightening the central locknut by a spanner.
If necessary the blocks can be dismounted from the side straps and used individually as work
holders.

Specifications: cat. No. AA-1929
  • Overall Length: 220 mm
  • Overall Width: 70 mm
  • Magnetic pull on each Block: 75 kg.
  • Dimensions of Each Block: L75 x W70 x H75 mm.
  • We also manufacture the magnetic Floaters/ Separators as per customer's specifications.

Magnetic Racks

Product Details:
  • Condition: New

“Crystal” brand Permanent Magnetic Racks are useful in tool room, workshops, paint shop,
machine shops, assembly, garages, to keep the hand tools such as spanners, screw drivers,
calipers, files, cutting tools, etc.
In a systematic manner. It helps the user for easy handling & storage.
They are available in different lengths.
Magnetic Racks are totally protected from rust and corrosion.
These racks can be easily mounted.
“Crystal” magnetic racks make the best possible use of permanent magnet material in the
solution of many lifting and holding problems, as all available magnetic flux from a small number
of magnets is concentrated in the two mild steel pole pieces.

Specifications:

Sr. No.Cat No.Dimensions
L XH X W
1.AA-3161150 X 25 X 30 mm
2.AA-3162225 X 25 X 30 mm
3.AA-3163300 X 25 X 30 mm

Special sizes are available.
Additional Information:
  • Item Code: AA-316

Magnetic Rectangular Blocks

Product Details:
  • Condition: New

Magnetic Rectangular Blocks:
  • Magnetic Blocks are designed to hold the steel components in position while welding, marking, and grinding.
  • They are useful in Tool-Room while doing assemblies of jigs and fixtures.
  • They are used with sine tables for inspection of components etc.
  • They can be used as magnetic parallels as the pairs are matched within ±5 micron. For bigger size on-off switch is provided.
  • We also manufacture ‘v’ blocks to customer’s specifications.

Standard Blocks-S:

Sr. No.Cat. No. Dimensions L x W x H
1AA-1931 S25 X 25 X 25
2AA-1932 S75 X 56 X 60
3AA-1933 S100 X 70 X 85
4AA-1934 S150 X 70 X 85

Hardened Blocks-H:

Sr. No.Cat. No. Dimensions L x W x H
1AA-1932 H75 X 56 X 60
2AA-1933 H100 X 70 X 85
3AA-1934 H150 X 70 X 85

Additional Information:
  • Item Code: AA-193

Magnetic Rectangular Blocks

Product Details:
  • Condition : New

Magnetic Rectangular Blocks:
  • Magnetic Blocks are designed to hold the steel components in position while welding, marking, and grinding.
  • They are useful in Tool-Room while doing assemblies of jigs and fixtures.
  • They are used with sine tables for inspection of components etc.
  • They can be used as magnetic parallels as the pairs are matched within ±5 micron. For bigger size on-off switch is provided.
  • We also manufacture ‘v’ blocks to customer’s specifications.

Standard Blocks-S:

Sr. No.Cat. No. Dimensions L x W x H
1AA-1931 S25 X 25 X 25
2AA-1932 S75 X 56 X 60
3AA-1933 S100 X 70 X 85
4AA-1934 S150 X 70 X 85

Hardened Blocks-H:

Sr. No.Cat. No. Dimensions L x W x H
1AA-1932 H75 X 56 X 60
2AA-1933 H100 X 70 X 85
3AA-1934 H150 X 70 X 85

Magnetic Right Angle Setting Device

"CRYSTAL" Magnetic Right Angle Setting Device is the answer when speedy right angle clamping
of sheet metal material is required.
When used in multiples a number of sheets can be held in the most complicated arrangement.
Being compact in size are useful in holding work in confined spaces.
Many uses will be found in Tool Room, Fabrication shops, Workshops and Quality Control.
The devices are precision ground for parallality and angle on types of holding applications.

Specifications:

Standard (SOFT)

Sr. No.Cat. No.Dimensions
L X WXH
1.AA-1913 SSO X 30 X 30
2.AA-1914 S100 X 40 X 40
3.AA-1915 S150 X 50 X 50
4.AA-1916 S200 X 50 X 50


Hardened: Same as AA-191 but with hardened holding surface and angle. With this type and bottom
holding surface equipped with hardened steel which ensure extra wear resistance.

Sr. No.Cat. No.Dimensions
L XWXH
LAA-1913H50X30 X30
2.AA-1914 H100 X 40 X 40
3.AA-1915 H150 X 50 X 50
4.AA-1916 H200 X 50 X 50

Additional Information:
  • Item Code: AA-191

Magnetic Sheet Puller

Most suitable for pulling- out steel material or steel sheets, carrying material like metal moulds,
Press Dies etc.
A cam mechanism is employed so as not to cause scratches on the surface of the job.
The job can be held or released smoothly.

Specifications:

SR.NOCat No.Dimensions in mm WX LXHTotal Height
1.AA-224915015040225mm
2.AA-225015022540225mm

Additional Information:
  • Item Code: AA-224

Magnetic Sticks

Magnetic Sticks
  • "CRYSTAL" magnetic sticks are very useful for removing steel particles from blind holes and useful for assembly & maintenance work for removing steel parts lying in oil tanks.
  • "CRYSTAL" magnetic sticks are compact unit embodying powerful 'Alnico' Magnets assembled in stainless steel pots which are designed for lifting applications. Length can be increased by joining extension.
  • Extra lengths are available on request.

Specification

 

Sr. No.Cat. No. DiameterLength mm
1AA-22293 mm150
2AA-22205 mm150
3AA-22216 mm150
4AA-22228 mm150
5AA-222310 mm150
6AA-222412 mm150
7AA-222514 mm150
8AA-222615 mm150
9AA-222716 mm150
10AA-222818 mm150

 


Additional Information:
  • Item Code: AA-222

Magnetic Tool Holder

Product Details:
  • Condition: New

Magnetic Tool Holder:
  • Designed to hold work magnetically for inspection & layout work,
  • Very Useful For Holding Odd shaped Parts for Grinding, Having large magnetic Surface Of 100 X 175mm. Precision Ground.
  • Accuracy for Flatness, Parallelism and Squarness is within 0.005mm.

 

Sr. No.Cat. No. Dimensions L x W x H
1AA-1501200X 120X100

Additional Information:
  • Item Code: AA-150

Magnetic Vice

Product Details:
  • Condition: New

Magnetic Vice:

  • “CRYSTAL” magnetic vice is a totally distortion free vice, capable of ensuring that the component holds square and set up time is minimized.
  • Overriding the distortion is one of the features the conventional vice, sometimes severely limiting its use.
  • Flatness 0.005mm. Squarness 0.005mm. Parallelism 0.005mm. Permanent powerful magnet.
  • ON-OFF switch.
  • All surfaces are precision ground.
  • Vertical ‘V’ in movable jaw.

Specifications:

 

Cat. No. Dimensions L x W x HJaw Holding Area
AA-2731110 x 180 x 75100 x 65
AA-2732160 x 225 x 90150 x 75


Additional Information:
  • Item Code: AA-273

Plate Type Magnetic Seperator

Product Details:
  • Condition: New

Plate Type Magnetic Separators are compact & with powerful magnetism made from stainless
steel sheet totally protected from rust.
They are designed for removing fine or Ferro large volume of ferrous & non ferrous material.
The ON-OFF can be activated by separating bottom cover with the help of handles.

Specifications:
  • Cat. No. AA-2236
  • Size: 125 x 175 x 30

Additional Information:
  • Item Code: AA-223

Pot Magnets

Product Details:
  • Condition: New

Pot Magnets:
  • “CRYSTAL” Pot Magnets are compact units embodying powerful “Alnico” magnets assembled in mild steel pot by aluminum retaining and insulating rings designed for magnetic holding and lifting applications of all sorts.
  • They can be readily inserted into other assemblies and the mild steel pot be easily machined to suit individual requirements.
  • Available in four sizes. Supplied complete with plated keeper.
  • Special sizes can also be manufactured.

Specifications:

 

Sr. No.Cat. No.Diameter
(OD)
Height
(H)
ThreadingDepth of Threading
(D)
Magnetic Pull
kg
1.AA-192118 mm16 mmM 55-6mm1.8
2.AA-192222 mm20 mmM 65-6mm2.8
3.AA-192327 mm25 mmM 65-6mm6.5
4.AA-192435 mm30 mmM 68-9mm11.5

Additional Information:
  • Item Code: AA-192
Looking for Magnetic Products ?
Share Us:
© Armatech Associates
Desktop Site Back to top